Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Springfield, MI

Paver Cleaning & Sealing for Pavers in Springfield, MI

Pressure wash with a surface cleaner for pavers. Paver cleaning, re-sanding with polymeric sand and sealing to lock joints, deter weeds and bring back color. Typical cost $600-$1,800.

Paver Cleaning & Sealing for Pavers is one of the jobs we do most often in Springfield, MI. Typical jobs cost $600-$1,800, and you approve the price before we begin. On pavers, the method we use is pressure wash with a surface cleaner.

The right method for the job

Pressure wash with a surface cleanerCleaning method
Usually 1,500-3,000 PSI with a surface cleaner, adjusted to keep joint sand in place where possiblePressure

Cleaning solution: A paver cleaner or pre-treatment; efflorescence needs a dedicated cleaner.

Caring for pavers

Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them. Re-sanding the joints, often with polymeric sand, and sealing afterward keeps weeds and ants out and holds the pavers in place.

Avoid: A narrow tip aimed into the joints, which blows out sand and can loosen pavers.

How often: Clean every 1-2 years; reseal every 2-4 years.

Signs you need paver cleaning & sealing for pavers

  • Weeds and moss growing in the joints
  • Joint sand washed out or full of ant hills
  • Faded, dull pavers
  • White haze (efflorescence) on the surface
  • Pavers shifting at the edges

What causes the dirt and stains

  • Rain and washing that remove joint sand over time
  • Shade and organic debris in the joints
  • Salts rising out of the pavers and base
  • UV fading the color

Easy upkeep between cleanings

  • Pull weeds before they root deeply
  • Top up joint sand where it's low
  • Keep downspouts from pouring onto pavers

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Blasting out joint sand and loosening pavers
  • Sealing over efflorescence or damp pavers, which traps a white haze
  • Using the wrong sealer, which can turn cloudy or slippery

How we handle paver cleaning & sealing for pavers

  1. Inspect the pavers, joints and edges
  2. Clean the pavers and treat efflorescence if present
  3. Let them dry and refill joints with polymeric sand
  4. Activate the sand and let it set
  5. Apply a paver sealer suited to the look you want

Typical paver cleaning & sealing for pavers prices

$600-$1,800Typical range for about 400-800 sq ft of pavers
1-2 days including dry timeTypical time on site
Clean every 1-2 years, reseal every 2-4 yearsRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for pavers

Serving Springfield, MI and nearby towns

Freeze-thaw cycles and deicing salt are hard on concrete in Michigan. Cleaning it in spring and sealing it before winter reduces how much water and salt soak in, which is what causes surface flaking (spalling).

Crews serve all of Springfield (ZIP codes 49015, 49017 and 49037), plus Level Park-Oak Park (3 mi), Battle Creek (3.2 mi), Brownlee Park (5 mi) and Galesburg (9.5 mi). Call (555) 010-0000 for a free quote in Springfield.

Paver Cleaning & Sealing for Pavers: frequently asked questions

How much does paver cleaning & sealing for pavers cost in Springfield, MI?

Paver Cleaning & Sealing for Pavers typically costs $600-$1,800 for about 400-800 sq ft of pavers, and usually takes 1-2 days including dry time. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for paver cleaning & sealing for pavers?

For pavers: usually 1,500-3,000 PSI with a surface cleaner, adjusted to keep joint sand in place where possible. What we avoid: a narrow tip aimed into the joints, which blows out sand and can loosen pavers. We keep the pressure even and controlled, with the right tools for the surface.

Is paver cleaning & sealing for pavers safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule paver cleaning & sealing for pavers?

Clean every 1-2 years; reseal every 2-4 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do, and sealers and stains need dry weather to cure. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Springfield, MI

House Washing for Vinyl Siding

Soft wash. Vinyl is the most common siding in the U.S.

Typical $300-$700

Graffiti Removal for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $200-$800

House Washing for Aluminum Siding

Soft wash. Older aluminum siding often has a chalky, oxidized finish.

Typical $300-$700

Commercial Pressure Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $400-$2,000

House Washing for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $300-$700

Sidewalk & Walkway Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $100-$250

Sidewalk & Walkway Cleaning for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $100-$250

Efflorescence Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $200-$600

Awning Cleaning

Cleaning fabric, vinyl and metal awnings on homes and storefronts to remove dirt, mildew and bird droppings.

Typical $150-$500

Graffiti Removal for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $200-$800

Commercial Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $400-$2,000

Patio Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $150-$400

Ready for a cleaner home or business?

Get a free pressure washing quote in Springfield, MI. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote